How to find the best jobs and apply...
How to find the best jobs and apply easily on Flying Career


Aircraft Painter Jobs in Wichita, KS at FACC Solutions, Inc.

Title: Aircraft Painter

Company: FACC Solutions, Inc.

Location: Wichita, KS

Title: Aircraft Painter
Department: Production
Reports to: Paint Lead, with oversight from Production Supervisor
Direct reports: None
Summary: The painter preps and paints major composite sub-assemblies for in-service commercial aircraft.

Sanding and trimming composite components
Surface preparation
Paint mixing
Application of various paints and lacquers through all stages from primer to top coat finish

Preferred qualifications:

1-3 years of experience in painting composite aero structures
Working knowledge of compressed air and paint application equipment
Ability to work with stencils and decals

Physical requirements: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
Physical Demands

The amount of work time standing/walking is >2/3
The amount of work time sitting is up to 1/3
The amount of work time bending/twisting/turning is up to 1/3
The amount of work time kneeling/squatting is up to 1/3
The amount of work time reaching overhead with hands and arms is 1/3 to 2/3
The amount of work time climbing or balancing on stairs or ladder is none
The amount of work time talking or listening (hearing) is >2/3
The amount of work time using hands to touch, handle or feel is >2/3
The amount of work time gripping, grasping, pinching, or squeezing repetitively is > 2/3
The amount of work time using vibratory tools is 1/3 to 2/3
The amount of work time using your taste or smell is none

Weight to be lifted or carried

0-25 pounds is >2/3
26-50 pounds is 1/3 to 2/3
51-75 pounds is up to 1/3
76-100 pounds is up to 1/3

Weight to be pushed or pulled

0-25 pounds is >2/3
26-50 pounds is 1/3 to 2/3
51-75 pounds is up to 1/3
76-100 pounds is up to 1/3

This position requires the use of vision up close (clear vision at 20 inches or less) and at a distance (clear vision at 20 feet or more), the ability to identify and distinguish colors, peripheral vision (ability to observe an area that can be seen up, down or to the left and/or right while the eyes are fixed on a given point), depth perception (three dimensional vision, ability to judge distance and spatial relationships), and the ability to adjust focus.
Work environment: The Painter performs work in a production environment and may regularly be exposed to dust and heat. The regular use of hand-held tools and equipment is required. Occasional exposure to loud noise (e.g., drilling) and fumes or airborne particles should be expected.
Exposure to the following chemicals is present and employees in this position must wear personal protective equipment.
· Acetone
· Benzene
· n-Butyl acetate
· Chlorobenzene
· Cyclohexanone
· Decane
· 1,2-Dichloroethane
· 1,4-Dioxane
· Ethyl acetate
· Ethyl benzene
· Heptane
· Hexane
· Hexavalent chromium
· Isooctane
· Methyl ethyl ketone
· Methyl isobutyl ketone
· Methylene chloride
· Octane
· Pentane
· Perchloroethylene
· n-Propyl acetate
· Styrene
· Tetrahydrofuran
· Toluene
· 1,1,1-Trichloroethane
· Trichloroethylene
· 1,2,4-Trimethylbenzene
· m-Xylene
· o-Xylene
· p-Xylene
Job Type: Full-time
Pay: $20.00 – $24.00 per hour

401(k) matching
Dental insurance
Health insurance
Life insurance
Paid time off
Vision insurance


8 hour shift
Monday to Friday


High school or equivalent (Preferred)


Aircraft Painting: 2 years (Preferred)
General Aviation: 2 years (Preferred)

Work Location: One location

Upload your CV/resume or any other relevant file. Max. file size: 80 MB.

About FACC Solutions, Inc.